Normal cutting speed( for dia.105mm):
  grade 00 grade 01 grade 02 grade 03 grade 04 grade 05
speed:
(m/min) 		0.8-1.0 1.0-1.5 1.5-2.0 2.0-2.3 2.3-2.8 >2.8

Bond choice as per the table below( for dia.105mm):
type grade 00 grade 01 grade 02 grade 03 grade 04 grade 05
Fast cutting     XGA-02-002AD
(XGS3)
(1.6-1.7m/min)
JWGA-02-002AD
(YGS3)
(1.6m/min)		     XGA-05-002AD
(XGS5)
(2.8-3.0m/min)
XGA-05-002AD
(XGS6)
(2.8-3.0m/min)
Normal HGA-00-002A(HGS6)
(0.8-0.9m/min)

JWGA-00-002A
(YGS4)
(0.9-1.0m/min) 		JWGA-01-002A
(YGS1)
(1.1-1.2m/min)		 HGA-02-002A
(HGS3)
(1.5-1.6m/min)

XGA-02-002A
(XGS2)
(1.4.-1.5m/min) 		RGA-03-002A
(RGS)
(2.0~2.1m/min)

 XGA-04-002A
(XGS4)
(2.5-2.6M/MIN)

HGA-04-002A
(HGS5)
(2.2~2.3m/min)		  
Long life
  XGA-02-002AB
(XGS1)
(1.4-1.5m/min)
      
* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

update: Jun. 29, 2010